24/7 service · Free inspection24/7 service · Free inspection in all governorates
Hotline:16062Miele ovens and hobs are made to be built into the kitchen — which is exactly what scares ordinary technicians: extraction from kitchen units takes training, and induction needs power-electronics understanding, not ordinary wiring. Our technicians are trained on both. If your oven isn't heating, the hob won't detect pans, or the pyrolytic door locked shut — call 16062; the inspection is free.
We repair: H built-in ovens (electric, pyrolytic, steam) · KM induction, ceramic and gas hobs · grills and warming drawers.
A gas smell from the hob, or sparks and a tripping breaker with induction? Shut the gas source or breaker immediately, open windows, ignite nothing — and call 16062: safety reports take instant priority.
Ovens and hobs share one page because they share your kitchen — find your symptom. One fixed rule: built-in ovens and induction hobs hold high voltage even after unplugging — never open them yourself:
The light is on, the fan spins, but heat is weak or absent.
a heating element (top, bottom, or the ring element behind the fan) failed, a misreading temperature sensor, or a board relay.
test different heating modes (top-only, bottom-only, fan) — one working and another not pinpoints a specific element, which confirms the diagnosis and speeds the repair. Elements are changed with genuine parts in one visit.
A blinking pan symbol, a zone not heating, or the hob cutting off after seconds.
the pan itself isn't magnetic or its base isn't flat (test a magnet on it), the zone's temperature sensor, or a power board — common with Egypt's voltage swings.
try a confirmed induction pan, dry the surface of any liquid, run a single zone only. Persisting = power-board diagnosis with a meter.
After a self-clean cycle the door stayed locked. That's a safety lock — the oven locks automatically while internal heat is above ~300°C.
wait two hours for a full cool-down; the lock should release itself. If it doesn't after fully cooling, the lock motor or its sensor needs a check — don't force the door: you'll break the lock and double the cost.
The igniter clicks but the flame won't catch, or it lights then dies when you release the knob.
burner ports clogged with grease, the thermocouple (the flame-sensing safety) coated or failed, or the safety valve.
brush the burner crown clean once cool, dry it fully after any washing, and hold the knob a full 10 seconds after ignition. Still dying = the thermocouple — a genuine part changed in one visit.
A crack in the inner or outer glass, or a door that won't seal and drops with a thud. Danger: cracked glass leaks heat and can finish cracking suddenly; an unsealed door wastes heat and lengthens cooking. The fix: genuine glass or hinges, removed and refitted properly without stressing the frame.
Air noise or flutter louder than usual. The cooling fan (which protects your kitchen fronts from heat) or the hot-air fan has grease build-up and lost balance.
only observe when it happens (during heating or constantly). Metallic sounds or steady vibration = fan and bearing check before it stops altogether.
Call 16062 or WhatsApp the model and fault — say whether it's built-in or freestanding so the technician brings extraction tools.
The built-in specialist arrives — trained on kitchen-unit extraction and induction high voltage.
A full check and the final price announced before any work — free inspection, your decision.
Repair with genuine parts, a full heating/cooking test, exact refitting, an invoice and a written 6-month warranty.
Heating elements of every type, temperature sensors, pyrolytic lock motors, door glass and hinges, induction boards, gas thermocouples — genuine Miele parts in stock, fitted in front of you under the 6-month warranty.
Our built-in specialists cover all of Egypt — focused on the kitchens of New Cairo, Zayed, October, Maadi, Heliopolis and Alexandria. Call 16062 with your area and model — gas and safety reports take instant priority.
The short number 16062, 24/7 across all governorates — or WhatsApp the model and fault to 01050887010. Gas-smell and spark reports take instant priority.
Precisely our specialty: our technicians extract Miele ovens and hobs from kitchen units with dedicated tools and refit them exactly — no scratched wood, no stressed countertop. Extraction and refitting are part of the service, not hidden extra fees.
Not necessarily — pyrolysis locks the door automatically while heat is above ~300°C and releases it after a full cool-down (about two hours). If it stays locked after cooling, the lock motor or sensor needs a check — and don't force the door.
Replaceable — genuine Miele hob glass is available for most models, fitted with the hob extracted from the countertop. Stop using it immediately: a crack plus liquids plus heat is a real electrical hazard.
On induction: usually that zone's power board or sensor — boards are divided by zones. On ceramic: the heating element itself. On gas: the thermocouple or valve. Precise diagnosis with a meter; repair usually in one visit.
The inspection is free and the full final price (parts + labour + extraction and refitting) is stated before any work — with a written 6-month warranty on the repair and part.
A Miele oven and hob are the heart of a modern kitchen. One call, a built-in specialist, and the kitchen works again — unscratched.
Professional extraction & refitting — free inspection — genuine parts — written 6-month warranty.
